Un-bricking, upgrading and/or repairing software faults on your Samsung Galaxy Note 4 can easily be done using this official firmware.

This is a four-file (AP, BL, CP and CSC) repair firmware with which you can unbrick your smartphone and/or fix other software faults on the device.

This firmware fixes software issues like:-

  • Un-brick bricked devices
  • Fix apps force closing
  • Device getting stuck during use, or lagging
  • Fix stuck on boot logo
  • Fix boot loop
  • Remove custom recovery (e.g, TWRP)
  • Remove root and restore default system files
  • Help upgrade/ update Android version to latest security patch
  • And just any software related faults

Before downloading any firmware for your Samsung device, check and confirm that the firmware is meant for your exact device model. This is necessary to avoid downloading the wrong file, causing your device to brick.

Firmware details/ Download

Model SM-N910A
N910AUCU1ANIE_ATT1ANIE_v4.4.4 Download
N910AUCU1COC4_ATT1COC4_AT & T_USA_v5.0.1 Download
N910AUCU2DOI2_ATT2DOI2_v5.1.1 Download

Model SM-N910C
N910CXXU1ANJ4_OJV1ANIF_Arabic_v4.4.4 Download
N910CXXU1ANK5_OLB1ANK5_v4.4.4 Download
N910CXXU1ANK5_XXU1ANL2_v4.4.4 Download
N910CXXU1COH4_OXA1COH4_v5.1.1 Download

Model SM-N910F
N910FXXU1ANK4_OXA1ANK4_v4.4.4 Download
N910FXXU1BOC3_VFG1BOC2_v5.0.1 Download

Model SM-N910G
N910GDTU1ANK3_ODD1ANK3_India_v4.4.4 Download
N910GDTU1BOE4_ODD1BOE1_India_v5.0.1 Download

Model SM-N910H
N910HXXU1ANIF_OXE1ANIF_v4.4.4 Download

Model SM-N910P
N910PVPU4COG5_SPT4COG5_Sprint_USA_v5.1.1 Download

Model SM-N910V
N910VVRU2BOG5_VZW2BOG5_Verizon_USA_v5.0.1 Download

How to flash Samsung Galaxy Note 4 via Odin

Note: Backup all important data (messages, contacts, app data, settings, etc) as these might be erased once flashing is successful.

Charge your phone to at least 50% before you proceed with the flashing instructions below. Read and follow all steps carefully, especially if you are not very experienced in flashing Samsung devices.

  • Download and install Samsung official USB driver on your computer. (Skip step if already installed)
  • Download and extract (unzip) the firmware file
  • Download Odin Tool
  • Extract the contents of Odin ZIP file
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  • Connect device to Computer via USB cable and wait until you get a blue sign in Odin
  • Select/ add the four firmware files extracted in step one.
    • For instance, BL is the bootloader file- click BL in Odin and select that file. In the same way, click AP, CP, and CSC select the files accordingly. See below screenshot

  • Make sure re-partition is NOT ticked
  • Click the start button and wait few minutes for the flashing process to begin and complete
  • Once flashing is complete, disconnect device and boot normally.