This guide provides instructions for flashing the official stock ROM on your TechPad i700 device. Use this firmware to restore your device to its factory state or resolve software issues.
Important Notes
- Backup all important data before flashing. The process may erase your device.
- Charge your device to at least 50% to prevent interruptions during flashing.
- Flashing incorrect firmware or interrupting the process can potentially brick your device.
Firmware Details
| Attribute | Value |
|---|---|
| File Name | RK3126C-TechPad_ANDROID-v7.1.2-Techpad-i700_M7042F-F86NS-1G_8G-v001-20180307_20180716-2009.7z |
| Size | 710 MB |
| Android Version | 7.1 |
| Download Link | Download Firmware |
Flashing Instructions
- Download the firmware file from the link provided above.
- Extract the contents of the archive to an empty folder on your computer.
- Ensure you have a functional USB cable for connecting your device to the computer.
- Download and install Rockchip Batchtool on your computer.
- Open Rockchip Batchtool.
- Connect your TechPad i700 to the computer using the USB cable.
- In Rockchip Batchtool, select the firmware file you extracted.
- Click the "Upgrade" or "Flash" button in Rockchip Batchtool.
- Wait for the flashing process to complete. Do not disconnect your device or interrupt the process.
- Once finished, your device will reboot automatically.
Post-Flashing
- If the device doesn't boot up automatically, manually restart it.
- The first boot after flashing may take longer than usual. Be patient.
- If you encounter any issues, try performing a factory reset through recovery mode.
You have successfully flashed the stock firmware on your TechPad i700. Your device should now be running the official software version you installed.
Remember to exercise caution when flashing firmware, as incorrect procedures can potentially damage your device. Always ensure you're using the correct firmware for your specific model.